What Is ERR_CONNECTION_RESET and How Do You Fix It? (Chrome, Phone, Server)

Sunucun 6 min read

ERR_CONNECTION_RESET is an error showing that the connection between your browser and a website’s server was suddenly cut off while data was being exchanged. Chrome then shows “The connection was reset” on the “This site can’t be reached” page together with the code ERR_CONNECTION_RESET; in the developer console or in apps the same error appears as net::ERR_CONNECTION_RESET. In this guide we explain exactly what the error means, its most common causes and how to fix it as a visitor, as a phone user and as a site owner.

Illustration: What Is ERR_CONNECTION_…

What Does ERR_CONNECTION_RESET Mean?

When the browser connects to a site, it opens a TCP connection to the server and receives the page’s data over that connection. If either end of the connection, or a device in between (a firewall, proxy or router), sends an RST (reset) packet, the connection closes at that moment. When the browser sees that the connection dropped before it received the response it was waiting for, it shows ERR_CONNECTION_RESET.

Telling this error apart from similar ones speeds up the fix:

ErrorWhat is happening?
ERR_CONNECTION_RESETThe connection was established but cut off suddenly during the data exchange
ERR_CONNECTION_REFUSEDThe server refused the connection at the start (closed port or service not running)
ERR_CONNECTION_TIMED_OUTNo response came from the server and the wait time ran out
ERR_CONNECTION_CLOSEDThe server closed the connection without sending data

Causes of the ERR_CONNECTION_RESET Error

  • Unstable internet connection: A weak Wi-Fi signal, a temporary router problem or line drops cause open connections to be reset.
  • Firewall and antivirus: Security software that inspects HTTPS traffic or cuts connections it finds suspicious can close the connection by sending an RST packet.
  • Proxy and VPN: A proxy or VPN that is not working or is misconfigured can cut the connection midway.
  • Network-level filtering: Content filters at a workplace, school or internet provider can reset connections they do not allow. In that case the error usually appears only on certain sites and only on that network.
  • Corrupted Winsock or network settings: A damaged network stack on Windows can cause random connection drops on all sites.
  • MTU mismatch: When packets larger than a device on the network can handle are sent, some pages open while others keep resetting.
  • Server-side problems: Security rules on the server, a crashing application, heavy load or a faulty SSL/TLS configuration make the server cut the connection.

First, Find Where the Problem Is

  • Does it happen on only one site? If other sites open, the problem is specific to that site or to something filtering the connection to it.
  • Does it happen on another network too? Open the site on your phone over mobile data. If it opens on mobile data, the problem is on your network (router, firewall, filter).
  • Does it happen in another browser too? If a different browser or an incognito window works, the cause is browser settings, the cache or an extension.

How to Fix ERR_CONNECTION_RESET on a Computer

1. Restart Your Router

Turn the router off, wait 30 seconds and turn it back on. If possible, try a wired connection instead of Wi-Fi.

2. Clear the Browser Cache and Turn Off Extensions

In Chrome, press Ctrl + Shift + Delete and clear “Cached images and files” and “Cookies and other site data”. Then open the site in an incognito window; if it opens, turn extensions off one by one on the chrome://extensions page to find the problem one.

3. Reset Winsock and TCP/IP Settings

On Windows, open Command Prompt as administrator, run these commands in order and then restart the computer:

netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns

This step often clears resets caused by a damaged network stack.

4. Turn Off Proxy and VPN

If a manual proxy is set under Settings > Network & Internet > Proxy, turn it off and leave “Automatically detect settings” on. If you use a VPN, disconnect it and try again.

5. Test the Firewall and Antivirus

Briefly turn off the web protection or HTTPS scanning feature of your antivirus and try opening the site. If it opens, add an exception for the site in the software and turn protection back on; do not leave protection off permanently.

6. Change Your DNS Server

In the adapter settings, enter the Google (8.8.8.8 / 8.8.4.4) or Cloudflare (1.1.1.1 / 1.0.0.1) DNS addresses in the Internet Protocol Version 4 (TCP/IPv4) properties. DNS on its own rarely causes connection resets, but on some networks redirects done at the DNS level can lead to them.

7. Check the MTU Value

If some sites open while others keep resetting, it may be an MTU problem. First see your connection’s name and current MTU value, then lower the value slightly and try again:

netsh interface ipv4 show subinterfaces
netsh interface ipv4 set subinterface "Wi-Fi" mtu=1400 store=persistent

Replace “Wi-Fi” with your own connection’s name. If the problem is not solved, set the value back (usually 1500).

8. Reset Chrome Settings

If the problem continues only in Chrome, go to Settings > Reset settings > Restore settings to their original defaults. This does not delete your bookmarks or saved passwords; it turns off extensions and clears temporary data.

ERR_CONNECTION_RESET on Android and iPhone

  • Switch between Wi-Fi and mobile data, and turn airplane mode on and off.
  • On Android, clear the cache under Settings > Apps > Chrome > Storage.
  • If you use a VPN, ad blocker or private DNS app, turn it off temporarily.
  • If the error appears inside an app (for example net::ERR_CONNECTION_RESET on a payment or login screen), update the app and try from a different network. If the problem continues, it is most likely on the server the app connects to; report it to the app’s support team.
  • As a last resort, use Reset network settings on Android, or Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings on iPhone (saved Wi-Fi passwords are deleted).

How to Fix ERR_CONNECTION_RESET as a Site Owner

If your visitors get this error from different networks, your server or a layer in front of it may be cutting the connection:

  1. Review firewall and WAF logs: ModSecurity, CSF, Fail2ban or CDN security rules can block certain requests (large form submissions, certain URL patterns) by cutting the connection. Search the block logs for the visitor’s IP.
  2. Check the web server error logs: Apache, Nginx or LiteSpeed error logs show crashing PHP processes, timeouts or connection limits.
  3. Check upload and timeout limits: If the connection drops during large file uploads, review upload_max_filesize, post_max_size and max_execution_time in PHP, and the request body size and timeout settings in the web server.
  4. Verify the SSL/TLS configuration: A missing certificate chain or unsupported protocols can cause the handshake to be reset for some clients. Check the configuration with an SSL test tool.
  5. Monitor resource usage: Servers that reach their RAM or process limits can cut new connections. If traffic has grown permanently, upgrade resources.

On shared hosting these problems are hard to solve because you cannot change the security rules or resource limits. If you want to manage the firewall, web server and PHP settings yourself, a VDS server with full administrator access gives you more control.

Conclusion

ERR_CONNECTION_RESET shows that the connection was cut by an RST packet during the data exchange. First determine whether the problem is on a single site, a single network or a single browser. On the visitor side, restarting the router, resetting Winsock and checking the proxy, VPN and security software solves the problem in most cases. If everyone sees the error, review the server’s security rules, error logs and limits.

Categories

Latest guides